RESOURCES
SPECIFICATION
| Item | Spec | ||
|---|---|---|---|
| AC Type | DC Type | BAT Type | |
| Power Input | 90~264VAC | 36~72VDC | 9~72VDC |
| Power Protection | Input Under Voltage Protection Output Over Load Protection Output Over Voltage Protection Output Short Protection Over Temperature Protection | Anti-reverse of Power Supply Input Under Voltage Protection Output Over Voltage Protection Output Over Current Protection Output Short Protection Over Temperature Protection | Anti-reverse of Power Supply Under Voltage Protection Over Voltage Protection Over Current Protection Over Temperature protection |
| Power Surge | 4KV/Line-PE 2KV/Line-Line | 2KV/Line-PE 1KV/Line-Line | 2KV/Line-PE 1KV/Line-Line |
| Rated Power | 560W | 560W | 600W |
| POE Rated Power | 500W | 500W | 500W |
| Certifications | Testing, FCC not yet | FCC | FCC |
| DDR4 RAM | 1GB | 1GB | 1GB |
| FLASH | 4MB+512MB | 4MB+512MB | 4MB+512MB |
| Backplane Bandwidth | 200 Gbps | 200 Gbps | 200 Gbps |
| Ethernet Ports | 16*10/100/1000/2500M RJ45 6*10G SFP+ | 16*10/100/1000/2500M RJ45 6*10G SFP+ | 16*10/100/1000/2500M RJ45 6*10G SFP+ |
| Console Port | 1 RS232 RJ45 pins: 3 (TXD), 6(RXD), 4/5 (GND) | 1 RS232 RJ45 pins: 3 (TXD), 6(RXD), 4/5 (GND) | 1 RS232 RJ45 pins: 3 (TXD), 6(RXD), 4/5 (GND) |
| USB Port | 1 USB2.0 Type A | 1 USB2.0 Type A | 1 USB2.0 Type A |
| External Sensors and Actuator Interface | 1 External temperature/humidity sensor 1 External Door sensor 1 AC/DC relay to control external box fans or blowers | 1 External temperature/humidity sensor 1 External Door sensor 1 AC/DC relay to control external box fans or blowers | 1 External temperature/humidity sensor 1 External Door sensor 1 AC/DC relay to control external box fans or blowers |
| POE Ports | RJ45 Ports 1~16 | RJ45 Ports 1~16 | RJ45 Ports 1~16 |
| POE Ports Surge | 8-Line-PE 6KV MDI_A/B/C/D +/- in pair 0.5KV POE DC+/DC- in pairs 6KV | 8-Line-PE 6KV MDI_A/B/C/D +/- in pair 0.5KV POE DC+/DC- in pairs 6KV | 8-Line-PE 6KV MDI_A/B/C/D +/- in pair 0.5KV POE DC+/DC- in pairs 6KV |
| POE Standard | Active POE (52V): IEEE 802.3bt/at/af, Passive POE (52V/26V) | Active POE (52V): IEEE 802.3bt/at/af, Passive POE (52V/26V) | Active POE (52V): IEEE 802.3bt/at/af, Passive POE (52V/26V) |
| POE Out Voltage Range | 52V/26V | 52V/26V | 52V/26V |
| POE RJ45 Pin | 2Pair: 4/5(+), 7/8(-) 4Pair: 1/2/4/5(+), 3/6/7/8(-) | 2Pair: 4/5(+), 7/8(-) 4Pair: 1/2/4/5(+), 3/6/7/8(-) | 2Pair: 4/5(+), 7/8(-) 4Pair: 1/2/4/5(+), 3/6/7/8(-) |
| Max POE Power Per Port | 26V 2Pair: 25W 26V 4Pair: 50W 52V 2Pair: 50W 52V 4Pair: 100W | 26V 2Pair: 25W 26V 4Pair: 50W 52V 2Pair: 50W 52V 4Pair: 100W | 26V 2Pair: 25W 26V 4Pair: 50W 52V 2Pair: 50W 52V 4Pair: 100W |
| FAN | 2 * Smart-control FANs with RPM monitoring and support single FAN failure protection | 2 * Smart-control FANs with RPM monitoring and support single FAN failure protection | 2 * Smart-control FANs with RPM monitoring and support single FAN failure protection |
| LED Action | Port 1~16 Link/Act Green=Link Green Flash=Activity Port 1~16 PoE Yellow=Delivering 26V Power with 2 pairs Yellow Flash=Delivering 26V Power with 4 pairs Red=Delivering 52V Power with 2 pairs Red Flash=Delivering 52V Power with 4 pairs Port 17~22 Link/Act Green=10G Link Green Flashing=10G Act Yellow=1G Link Yellow flashing=1G Act | Port 1~16 Link/Act Green=Link Green Flash=Activity Port 1~16 PoE Yellow=Delivering 26V Power with 2 pairs Yellow Flash=Delivering 26V Power with 4 pairs Red=Delivering 52V Power with 2 pairs Red Flash=Delivering 52V Power with 4 pairs Port 17~22 Link/Act Green=10G Link Green Flashing=10G Act Yellow=1G Link Yellow flashing=1G Act | Port 1~16 Link/Act Green=Link Green Flash=Activity Port 1~16 PoE Yellow=Delivering 26V Power with 2 pairs Yellow Flash=Delivering 26V Power with 4 pairs Red=Delivering 52V Power with 2 pairs Red Flash=Delivering 52V Power with 4 pairs Port 17~22 Link/Act Green=10G Link Green Flashing=10G Act Yellow=1G Link Yellow flashing=1G Act |
| Operating Temperature | -30~60℃ | -30~60℃ | -30~60℃ |
| Operating Humidity | 5%~95% (Non-Condensing) | 5%~95% (Non-Condensing) | 5%~95% (Non-Condensing) |
| Mount Option | Desktop/19" rack mount/Wall Mount | Desktop/19" rack mount/Wall Mount | Desktop/19" rack mount/Wall Mount |
| Weight | N.W. 3.33Kg (1 PCS) G.W. 4.35Kg (1 PCS) G.W. 19.13Kg (4 PCS) | N.W. 3.33Kg (1 PCS) G.W. 4.35Kg (1 PCS) G.W. 19.13Kg (4 PCS) | N.W. 3.33Kg (1 PCS) G.W. 4.35Kg (1 PCS) G.W. 19.13Kg (4 PCS) |
| Dimensions(W*D*H) | 440mm*240mm*44mm | 440mm*240mm*44mm | 440mm*240mm*44mm |
| Standard |
Passive POE |
Active POE |
||||
| RJ45 Pins | 2pair-26V | 4pair-26V | 2pair-52V | 4pair-52V | 2pair-Auto
(802.3af/at) |
4pair-Atuo
(802.3bt) |
| 1 | 26V+ | 52V+ | 52V+ | |||
| 2 | 26V+ | 52V+ | 52V+ | |||
| 3 | 26V- | 52V- | 52V- | |||
| 6 | 26V- | 52V- | 52V- | |||
| 4 | 26V+ | 26V+ | 52V+ | 52V+ | 52V+ | 52V+ |
| 5 | 26V+ | 26V+ | 52V+ | 52V+ | 52V+ | 52V+ |
| 7 | 26V- | 26V- | 52V- | 52V- | 52V- | 52V- |
| 8 | 26V- | 26V- | 52V- | 52V- | 52V- | 52V- |
| LED | Yellow | Yellow Flashing | RED | RED Flashing | Green | Green Flashing | |
| Port 1~16 | LINK/ACT | – | – | LINK | ACT | ||
| POE | 26V-2Pairs | 26V-4Pairs | 52V-2Pairs | 52V-4Pairs | – | – | |
| Port 17~22 | LINK/ACT | 1G LINK | 1G ACT | – | – | 10G LINK | 10G ACT |
| PWR | – | – | – | – | PWR ON | – | |
| RUN | – | – | – | – | – | RUN(1Hz) | |
| ALM | – | – | ALM | – | – | – | |
| USB | – | – | – | – | USB LINK | USB ACT | |
1.DC Type support positive or negative 48VDC power supply, the end user must grantee the “+” pole voltage is higher than the “-” pole，and in range of 36VDC~72VDC.
2.For BAT type, the end user must grantee the “+” pole voltage is higher than the “-” pole，and in range of 9VDC~72VDC. DO NOT connect the communication -48VDC power supply（which connect “+” to EARTH）to the PVT products. The PDs which connect POE ”+” to EARTH is NOT ALLOWED to access this BAT Type PVT products. BAT Type mass-produced product support positive or negative power supply. The end user must grantee the “+” pole voltage is higher than the “-” pole，and in range of 9VDC~72VDC.
3.The BAT type PVT products SN is in the range of NYMTBIC00002~ NYMTBIC00050, and MAC is in the range of 54:91:AF:B2:00:97~ 54:91:AF:B2:00:C7
4.The BAT type mass-produced products SN and MAC are out of the range of above PVT products.
5.The relay is in the switch, which support 1.5A@200VDC/140AC or 0.4A@400VDC/280VAC.
6.There are 4 Groups: Ports 1~4, 5~8, 9~12, 13~16. 26V Ports and 52V Ports can’t coexist in the same group. Each group must operate under the same voltage. The software will inform the administrator.
7.The total POE power can’t exceed 500W
8. For some corner cases, At-Risk 24V Non-isolated Passive PoE PDs connected to very early HyconextHC16MT6XPUP BAT/AC Series Switches, may be damaged. Please find details in the attachment.
| Item | Spec | Detail Spec |
|---|---|---|
| System Management | Chassis View System Configuration CPU Management Memory Management FAN Management Power Management Temperature Management Voltage Management Network Configuration User Management SNMP Configuration Log Configuration Syslog Configuration Print Configuration Save&Erase Reboot Boot OS Select | |
| Interface Management | Eth-Port | Description Enable/Disable Speed-Duplex Flow Control Flow Statistic Multicast Storm Control Broadcast Storm Control DLF Storm Control MTU Rate Limit Priority |
| Eth-Trunk | LACP/Static | |
| VLAN | Access VLAN Trunk VLAN Hybrid VLAN |
|
| Service | MAC Address | Aging time Static Address |
| ARP | ||
| VLAN IF IP | ||
| LoopCheck | ||
| LLDP | ||
| STP | MSTP/RSTP/STP | |
| Mirror | ||
| IGMP Snooping | ||
| DHCP Snooping | ||
| NTP | ||
| Timerange | ||
| Vlan Mapping | ||
| LACP | ||
| FTP | ||
| POE | Active/Passive POE Configured Per Port（auto or force，foce will be configured 2/4 pair，26V/52V） Monitor Battery Input DC voltage and current Monitor PoE Power/Current Per Port Shutdown/power up POE ports according the battery status and POE port priority. Config Switch Hibernate Voltage/Switch Wakeup Voltage/Battery Warning Voltage |
|
| Port Bounce | ||
| Port Watchdog | ||
| External Sensor/Actuator | ||
| VCT | Cable Diagnostics | |
| ACL | ||
| Static Route | ||
| Security | IPSG Isolate |
User guide of external sensors and actuator
The Switch provide 2 external sensors and 1 external actuator. The 2 external sensors can be found in the standard accessory pack. There is a relay in the switch, which can be used to control the outside chassis fan. The ISP must prepare the outside fan by themselves.
Security Caution
1.The BAT device has NO ISOLATED POWER SYSTEM INSIDE. The grounding studs on the back panel and racks MUST be connected by a grounding wire to ensure that the device is reliably grounded. The PE/FG of BAT type PVT products are connected to GND of DC input, 52V output, 26V output and 12V output, while the PE/FG of the mass-produced products are not connected to neither positive or negative of DC input, 52V output, 26V output or 12V output.
The BAT type PVT products can only be connected to the battery or the DC power supply which isolated from the Earth. The BAT Type mass-produced product support positive or negative power supply. The end user must grantee the “+” pole voltage is higher than the “-” pole，and in range of 9VDC~72VDC.
Note: The BAT type PVT products SN is in the range of NYMTBIC00002~ NYMTBIC00050, and MAC is in the range of 54:91:AF:B2:00:97~ 54:91:AF:B2:00:C7. The BAT type mass-produced products SN and MAC are out of the range of above PVT products.
2.The DC type devices isolate the input and output, and isolate the 52V output and 12V output. 52V, 26V are not isolated and share the same GND. The grounding studs on the back panel and racks MUST be connected by a grounding wire to ensure that the device is reliably grounded. DC Type support positive or negative 48VDC power supply, the end user must GUARANTEE the “+” pole voltage is higher than the “-” pole，and in range of 36VDC~72VDC.
3.The AC type devices isolate the input and 52V output. 52V, 26V and 12V are not isolated and share the same GND. The grounding studs on the back panel and racks MUST be connected by a grounding wire to ensure that the device is reliably grounded.
4.For the BAT type device, Operator must GUARANTEE the whole system include the PSE and the PDs will not be shorted by the Earth. So DO NOT connect the BAT type PVT products to standard communication -48V power system (which “+” is connected to the Earth and “-“ is connected to -48V). The PDs which connect POE ”+” to the Earth is NOT ALLOWED to access this BAT type PVT products. The PDs which connect POE ”-” to EARTH is NOT ALLOWED to access the mass-produced products that are connected to the communication -48VDC power supply (which connect “+” to EARTH).
5.Must connect the input power cord first, and then turning on the switch between the battery/isolated DC power and the BAT type device. The use of external fuses is encouraged for the BAT type device.
6.RISK OF ELECTRIC SHOCK，DO NOT OPEN THE ENCLOSURE.
7.CAUTION: Disconnect mains before servicing.
8. For some corner cases, At-Risk 24V Non-isolated Passive PoE PDs connected to very early HyconextHC16MT6XPUP BAT/AC Series Switches, may be damaged. Please find details in the attachment.
* Picture is for illustrations purposes only.